Search found 124 matches

by Country_Bubba
Wed Jun 28, 2023 5:23 pm
Forum: AutoLeveller Software
Topic: [SOLVED] Autoleveller no work fine when the axis X change of direction
Replies: 2
Views: 1957

Re: [SOLVED] Autoleveller no work fine when the axis X change of direction

Hi,
Glad you were able to figure it out! Some of the settings can be inter reactive and hard to chase down.
Good Job
by Country_Bubba
Tue Mar 08, 2022 10:29 pm
Forum: AutoLeveller Software
Topic: customize Autoleveller with a homemade cnc.
Replies: 5
Views: 4600

Re: customize Autoleveller with a homemade cnc.

OK, I am not familiar with your controller, but looking under the "Controller" drop down menu you have four options at this point. These are Mach, Linuxcnc, Turbocnc, and Custom. Linuxcnc uses G38.x for probing Mach3 uses G32 Turbocnc uses G33 In all three of these cases, the probe results are writt...
by Country_Bubba
Sun Aug 29, 2021 3:57 pm
Forum: Bug Report
Topic: Does not handle G82
Replies: 5
Views: 8180

Re: Does not handle G82

The way I read this is the first part of the command adjusts for the height of the surface (#100) and then it will drill down the 0.2540 depth and then dwell the required time and return to the proper height.
by Country_Bubba
Wed Oct 07, 2020 6:15 pm
Forum: AutoLeveller Software
Topic: Manual Tool Change
Replies: 2
Views: 4642

Re: Manual Tool Change

I didn't answer when you posted your question as I do not use Mach!
I can only say that I use Turbocnc and do a single probe and let the post processor for Eagle do all the tool change coding.
I would expect it to work in a very similar way in Mach, but YMMV!
by Country_Bubba
Thu Jun 11, 2020 1:14 pm
Forum: AutoLeveller Software
Topic: I can't download autoleveller from the autor page
Replies: 5
Views: 7693

Re: I can't download autoleveller from the autor page

Yep, works for me also. :D
Looks like all is restored.

Thanks James.
by Country_Bubba
Wed Jun 10, 2020 7:14 pm
Forum: AutoLeveller Software
Topic: I can't download autoleveller from the autor page
Replies: 5
Views: 7693

Re: I can't download autoleveller from the autor page

HI,
I just tried to get into the sight and like you couldn't.
The best I can do and have done is write an email to James, the owner to see if he can get it fixed.

Country Bubba
Moderator
by Country_Bubba
Thu Mar 26, 2020 12:08 am
Forum: AutoLeveller Software
Topic: AE Leveller Recover - Documentation
Replies: 3
Views: 6409

Re: AE Leveller Recover - Documentation

Hi guys, OK, I will take a stab at the questions but realize I am not all that smart especially relating to Mach as I don't use it. But having said that, I seem to remember people having problems with "run from here" to begin with and yes, I think the documentation is based on the older version. I h...
by Country_Bubba
Tue Feb 04, 2020 1:26 pm
Forum: AutoLeveller Software
Topic: Using autoleveller with 3d shapes
Replies: 2
Views: 4341

Re: Using autoleveller with 3d shapes

Hi,
I am going to take a stab at this one and state that I doubt that it will work. My logic behind this is that Autoleveler is designed to make the cutting surface come to one plane. As I understand your question, you have multiplanes that you want to surface?
by Country_Bubba
Thu Jun 13, 2019 2:18 pm
Forum: AutoLeveller Software
Topic: Probing not responding 6040 CNC mach3
Replies: 3
Views: 5517

Re: Probing not responding 6040 CNC mach3

I am purely guessing, but have you checked all of your connections including solder joints. Sounds like an intermittent connections somewhere in your system. Also check your wires to make sure they are not broken internally.

Just a guess on my part.
by Country_Bubba
Wed Dec 26, 2018 1:03 pm
Forum: AutoLeveller Software
Topic: Help to use two ISO codes before milling.
Replies: 4
Views: 6003

Re: Help to use two ISO codes before milling.

doraimontv, Based on what I am reading, it appears that your are going straight to the "Autolevel" button to generate your final Gcode file. Instead, click on "Generate PFG" file and this will make a stand alone Raw Probe File. This can be loaded back into the program along with the Original Gcode f...