Test Post

Discuss all things

Moderator: Country_Bubba

Post Reply
User avatar
Country_Bubba
Posts: 124
Joined: Wed Oct 02, 2013 3:07 pm
Location: LaGrange, GA USA
Contact:

Test Post

Post by Country_Bubba »

Based on some problem reports, this is a test message to see how things are working. :?:

This is a test to see if we can edit the posting. :idea:
Art
Country Bubba
daedelus
Site Admin
Posts: 387
Joined: Tue Oct 01, 2013 1:41 pm
Location: London, UK
Contact:

Re: Test Post

Post by daedelus »

Cheers Art, had some recent issues with the forum and wasnt sure how many were affected, if any. This helps a lot :)

If anyone else has problems, please dont hesitate to let me know.
http://www.autoleveller.co.uk/. Software to probe and adjust a GCode file for PCB's or any probe-able surface.

http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.

-James
User avatar
Country_Bubba
Posts: 124
Joined: Wed Oct 02, 2013 3:07 pm
Location: LaGrange, GA USA
Contact:

Re: Test Post

Post by Country_Bubba »

Seems to be working fine. :D

Got notification and logged in with no problems to get to the post and obviously, can respond
Art
Country Bubba
User avatar
Country_Bubba
Posts: 124
Joined: Wed Oct 02, 2013 3:07 pm
Location: LaGrange, GA USA
Contact:

Re: Test Post

Post by Country_Bubba »

Based on some recent changes, this once again is a test post to see if all is working. :lol:
Art
Country Bubba
Post Reply