Auto level code not correct with usb chines CNC and RnRMotion controller

[userhomeinit]

Hello,
I want to use the autolevellerAE software with my cnc machine but the result of the probing is quite strange.
I searched on the internet and I understand that many people have the same issue with USB CNC machines.
When I analyzed the code generated by my cnc I noticed some duplicated lines:

Code: Select all

5.58282,104.56733,0.10396 
16.24227,5.23248,-0.00313 
26.90172,5.23248,0.00313 
37.56055,5.23248,0.03945 
48.22124,5.23248,0.10458 
58.88069,5.23248,0.16470 
58.88069,5.23248,0.16470 
58.88069,5.23248,0.16470 
58.88069,5.23248,0.16470 
58.88069,5.23248,0.16470 
58.88069,5.23248,0.16470 
122.83864,5.23248,0.22106 
122.83864,5.23248,0.22106 
122.83864,5.23248,0.22106 
122.83864,5.23248,0.22106 
122.83864,5.23248,0.22106 
122.83864,5.23248,0.22106 
122.83864,5.23248,0.22106 
122.83864,5.23248,0.22106 
122.83864,5.23248,0.22106 
122.83864,5.23248,0.22106 
90.85967,16.26941,0.24611 
90.85967,16.26941,0.24611 
69.54015,16.26941,0.20228 
69.54015,16.26941,0.20228 
48.22124,16.26941,0.11398 
48.22124,16.26941,0.11398 
48.22124,16.26941,0.11398 
48.22124,16.26941,0.11398 
48.22124,16.26941,0.11398 
48.22124,16.26941,0.11398 
16.24227,27.30696,0.02004 
16.24227,27.30696,0.02004 
37.56179,27.30696,0.07953 
48.22000,27.30696,0.11961 
48.22000,27.30696,0.11961 
48.22000,27.30696,0.11961 
48.22000,27.30696,0.11961 
90.85843,27.30696,0.23108 
101.51912,27.30696,0.23046 
101.51912,27.30696,0.23046 
122.83740,27.30696,0.19539 
133.49809,27.30696,0.16408 
133.49809,27.30696,0.16408 
133.49809,27.30696,0.16408 
133.49809,27.30696,0.16408 
144.15754,38.34389,0.13777 
144.15754,38.34389,0.13777 
122.83864,38.34389,0.17973 
122.83864,38.34389,0.17973 
122.83864,38.34389,0.17973 
122.83864,38.34389,0.17973 
122.83864,38.34389,0.17973 
69.54015,38.34389,0.19539 
69.54015,38.34389,0.19539 
69.54015,38.34389,0.19539 
69.54015,38.34389,0.19539 
69.54015,38.34389,0.19539 
69.54015,38.34389,0.19539 
5.58282,38.34389,0.02254 
5.58282,49.38020,0.03757 
16.24227,49.38144,0.05198 
16.24227,49.38144,0.05198 
16.24227,49.38144,0.05198 
48.22000,49.38144,0.13777 
58.88069,49.38144,0.16846 
58.88069,49.38144,0.16846 
58.88069,49.38144,0.16846 
90.85843,49.38144,0.21292 
90.85843,49.38144,0.21292 
90.85843,49.38144,0.21292 
122.83740,49.38144,0.17096 
122.83740,49.38144,0.17096 
144.15754,49.38144,0.12212 
144.15754,49.38144,0.12212 
144.15754,49.38144,0.12212 
144.15754,49.38144,0.12212 
133.49809,60.41837,0.13151 
122.83864,60.41837,0.16220 
122.83864,60.41837,0.16220 
122.83864,60.41837,0.16220 
122.83864,60.41837,0.16220 
122.83864,60.41837,0.16220 
69.54015,60.41837,0.19351 
69.54015,60.41837,0.19351 
69.54015,60.41837,0.19351 
37.56179,60.41837,0.11961 
37.56179,60.41837,0.11961 
37.56179,60.41837,0.11961 
37.56179,60.41837,0.11961 
37.56179,60.41837,0.11961 
16.24227,71.45592,0.08580 
16.24227,71.45592,0.08580 
37.56179,71.45592,0.12149 
48.22000,71.45592,0.14529 
48.22000,71.45592,0.14529 
69.54015,71.45592,0.17911 
69.54015,71.45592,0.17911 
69.54015,71.45592,0.17911 
69.54015,71.45592,0.17911 
112.17919,71.45592,0.17096 
112.17919,71.45592,0.17096 
133.49809,71.45592,0.11272 
133.49809,71.45592,0.11272 
154.81762,71.45592,0.06200 
154.81762,71.45592,0.06200 
144.15754,82.49285,0.07139 
133.49809,82.49285,0.08767 
133.49809,82.49285,0.08767 
133.49809,82.49285,0.08767 
133.49809,82.49285,0.08767 
133.49809,82.49285,0.08767 
133.49809,82.49285,0.08767 
133.49809,82.49285,0.08767 
58.88194,82.49285,0.16971 
58.88194,82.49285,0.16971 
37.56179,82.49285,0.12838 
37.56179,82.49285,0.12838 
37.56179,82.49285,0.12838 
5.58282,82.49285,0.07703 
5.58282,82.49285,0.07703 
16.24227,93.53040,0.09331 
16.24227,93.53040,0.09331 
37.56179,93.53040,0.13151 
37.56179,93.53040,0.13151 
37.56179,93.53040,0.13151 
69.54015,93.53040,0.18098 
69.54015,93.53040,0.18098 
90.85843,93.53040,0.18662 
90.85843,93.53040,0.18662 
90.85843,93.53040,0.18662 
90.85843,93.53040,0.18662 
133.49809,93.53040,0.08141 
144.15754,93.53040,0.05448 
144.15754,93.53040,0.05448 
154.81762,104.56733,-0.02881 
154.81762,104.56733,-0.02881 
154.81762,104.56733,-0.02881 
154.81762,104.56733,-0.02881 
154.81762,104.56733,-0.02881 
154.81762,104.56733,-0.02881 
154.81762,104.56733,-0.02881 
154.81762,104.56733,-0.02881 
154.81762,104.56733,-0.02881 
154.81762,104.56733,-0.02881 
154.81762,104.56733,-0.02881 
37.56179,104.56733,0.11773 
26.90172,104.56733,0.09456 
26.90172,104.56733,0.09456 
5.58282,104.56733,0.08642 

Could we modify the code to make this happen, is there any post in the forum that could help,
I've seen this post but is it not the same issue but similar : https://www.cncsoftwaretools.com/forum/ ... .php?t=349
Thank you in advance,
Tarik

[userhomeinit]

I think the answer to my question is in this post: https://www.cncsoftwaretools.com/forum/ ... .php?t=937
Thank you to this person for his work.
Now I could prob my PCB and the results are good!