From KiCAD to Isolation Routing - my process

Help for setting up and using
Post Reply
WoodWorkerB
Posts: 10
Joined: Thu Nov 28, 2013 2:51 am

From KiCAD to Isolation Routing - my process

Post by WoodWorkerB »

I finally got around to documenting the steps I use to mill a prototype PC board on my DIY CNC router. One reason I really love this approach is allowing the CNC machine to drill all those damn holes, perfectly!

Anyhow, here's what I've documented so far, from KiCAD to FlatCAM to Autoleveller to milling. Happy routing!

https://hobbycnc.com/pc_board_isolation_routing/

BrianV
https://hobbycnc.com
daedelus
Site Admin
Posts: 387
Joined: Tue Oct 01, 2013 1:41 pm
Location: London, UK
Contact:

Re: From KiCAD to Isolation Routing - my process

Post by daedelus »

Hey this could be very helpful. Thanks. Will make it a sticky
http://www.autoleveller.co.uk/. Software to probe and adjust a GCode file for PCB's or any probe-able surface.

http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.

-James
Post Reply