I can't download autoleveller from the autor page

Help for setting up and using
Post Reply
alejoyuk
Posts: 1
Joined: Wed Jun 10, 2020 4:23 pm

I can't download autoleveller from the autor page

Post by alejoyuk »

When i try to get acces to the www.autoleveller.co.uk i get http error 500. somebody know how solve this issue.
User avatar
Country_Bubba
Posts: 124
Joined: Wed Oct 02, 2013 3:07 pm
Location: LaGrange, GA USA
Contact:

Re: I can't download autoleveller from the autor page

Post by Country_Bubba »

HI,
I just tried to get into the sight and like you couldn't.
The best I can do and have done is write an email to James, the owner to see if he can get it fixed.

Country Bubba
Moderator
Art
Country Bubba
daedelus
Site Admin
Posts: 387
Joined: Tue Oct 01, 2013 1:41 pm
Location: London, UK
Contact:

Re: I can't download autoleveller from the autor page

Post by daedelus »

Good point. Its not working for me either.
This occasionaly happens with my web host and it usually sorts itself out soon. Check tomorrow and I will do the same. If its still not working I shall delve deeper and bang some heads together.

Cheers,
http://www.autoleveller.co.uk/. Software to probe and adjust a GCode file for PCB's or any probe-able surface.

http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.

-James
daedelus
Site Admin
Posts: 387
Joined: Tue Oct 01, 2013 1:41 pm
Location: London, UK
Contact:

Re: I can't download autoleveller from the autor page

Post by daedelus »

Yep, still not working.
The staff at my web host are not as active due to COVID I guess, so i'm not sure how long it will take to fix. I'll let you know here when its resolved.
http://www.autoleveller.co.uk/. Software to probe and adjust a GCode file for PCB's or any probe-able surface.

http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.

-James
daedelus
Site Admin
Posts: 387
Joined: Tue Oct 01, 2013 1:41 pm
Location: London, UK
Contact:

Re: I can't download autoleveller from the autor page

Post by daedelus »

Should be up and running now.
http://www.autoleveller.co.uk/. Software to probe and adjust a GCode file for PCB's or any probe-able surface.

http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.

-James
User avatar
Country_Bubba
Posts: 124
Joined: Wed Oct 02, 2013 3:07 pm
Location: LaGrange, GA USA
Contact:

Re: I can't download autoleveller from the autor page

Post by Country_Bubba »

Yep, works for me also. :D
Looks like all is restored.

Thanks James.
Art
Country Bubba
Post Reply