From KiCAD to Isolation Routing - my process

Help for setting up and using
Post Reply
WoodWorkerB
Posts: 10
Joined: Thu Nov 28, 2013 2:51 am

From KiCAD to Isolation Routing - my process

Post by WoodWorkerB » Thu Nov 22, 2018 5:00 am

I finally got around to documenting the steps I use to mill a prototype PC board on my DIY CNC router. One reason I really love this approach is allowing the CNC machine to drill all those damn holes, perfectly!

Anyhow, here's what I've documented so far, from KiCAD to FlatCAM to Autoleveller to milling. Happy routing!

https://hobbycnc.com/pc_board_isolation_routing/

BrianV
https://hobbycnc.com

daedelus
Site Admin
Posts: 364
Joined: Tue Oct 01, 2013 1:41 pm
Location: London, UK
Contact:

Re: From KiCAD to Isolation Routing - my process

Post by daedelus » Thu Nov 22, 2018 12:09 pm

Hey this could be very helpful. Thanks. Will make it a sticky
http://www.autoleveller.co.uk/. Software to probe and adjust a GCode file for PCB's or any probe-able surface.

http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.

-James

Post Reply