Presentation and request for help

Help for setting up and using
Post Reply
F6FCO
Posts: 4
Joined: Sat Mar 21, 2020 11:16 pm

Presentation and request for help

Post by F6FCO » Sun Mar 22, 2020 9:54 am

Good morning all,
I am new to the forum, I came to seek help for the use of Autoleveller.
Excuse my bad english, I'm on Google Translate.
I work under LinuxCNC, when I load my gcode (generated under Eagle / Cambam) under Axis everything goes well and I can machine. If I pass my work under Autolevel, it shows me the two big circles tangent when it is not happy.
I tried with several different works and it does it all the time.
It seems that with the header he no longer recognizes the dimensions of the crude.

Anyone have an idea of ​​the problem?
Thank you
Last edited by F6FCO on Sun Mar 22, 2020 10:06 am, edited 2 times in total.

F6FCO
Posts: 4
Joined: Sat Mar 21, 2020 11:16 pm

Re: Présentation d'un nouvel ancien du forum

Post by F6FCO » Sun Mar 22, 2020 10:04 am

My work without Autoleveller
1.png
with Autoleveller
Cercles.png

Post Reply