I can't download autoleveller from the autor page

Help for setting up and using
Post Reply
alejoyuk
Posts: 1
Joined: Wed Jun 10, 2020 4:23 pm

I can't download autoleveller from the autor page

Post by alejoyuk » Wed Jun 10, 2020 4:31 pm

When i try to get acces to the www.autoleveller.co.uk i get http error 500. somebody know how solve this issue.

User avatar
Country_Bubba
Posts: 120
Joined: Wed Oct 02, 2013 3:07 pm
Location: LaGrange, GA USA

Re: I can't download autoleveller from the autor page

Post by Country_Bubba » Wed Jun 10, 2020 7:14 pm

HI,
I just tried to get into the sight and like you couldn't.
The best I can do and have done is write an email to James, the owner to see if he can get it fixed.

Country Bubba
Moderator
Art
Country Bubba

daedelus
Site Admin
Posts: 381
Joined: Tue Oct 01, 2013 1:41 pm
Location: London, UK
Contact:

Re: I can't download autoleveller from the autor page

Post by daedelus » Wed Jun 10, 2020 9:03 pm

Good point. Its not working for me either.
This occasionaly happens with my web host and it usually sorts itself out soon. Check tomorrow and I will do the same. If its still not working I shall delve deeper and bang some heads together.

Cheers,
http://www.autoleveller.co.uk/. Software to probe and adjust a GCode file for PCB's or any probe-able surface.

http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.

-James

daedelus
Site Admin
Posts: 381
Joined: Tue Oct 01, 2013 1:41 pm
Location: London, UK
Contact:

Re: I can't download autoleveller from the autor page

Post by daedelus » Thu Jun 11, 2020 8:03 am

Yep, still not working.
The staff at my web host are not as active due to COVID I guess, so i'm not sure how long it will take to fix. I'll let you know here when its resolved.
http://www.autoleveller.co.uk/. Software to probe and adjust a GCode file for PCB's or any probe-able surface.

http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.

-James

daedelus
Site Admin
Posts: 381
Joined: Tue Oct 01, 2013 1:41 pm
Location: London, UK
Contact:

Re: I can't download autoleveller from the autor page

Post by daedelus » Thu Jun 11, 2020 9:53 am

Should be up and running now.
http://www.autoleveller.co.uk/. Software to probe and adjust a GCode file for PCB's or any probe-able surface.

http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.

-James

User avatar
Country_Bubba
Posts: 120
Joined: Wed Oct 02, 2013 3:07 pm
Location: LaGrange, GA USA

Re: I can't download autoleveller from the autor page

Post by Country_Bubba » Thu Jun 11, 2020 1:14 pm

Yep, works for me also. :D
Looks like all is restored.

Thanks James.
Art
Country Bubba

Post Reply