Search found 3 matches

by tomeletctronics
Tue Aug 31, 2021 2:02 pm
Forum: Bug Report
Topic: Does not handle G82
Replies: 5
Views: 1062

Re: Does not handle G82

Thanks for your attention to this issue. Actually it's not a drill file, it's an etch file created with Eagle and the pcb-gcode ulp. There is an option to spot all hole positions with the engraving tool so a tiny drill won't wander off and break when the drill operation is executed. I think the easy...
by tomeletctronics
Mon Aug 30, 2021 7:20 pm
Forum: Bug Report
Topic: Does not handle G82
Replies: 5
Views: 1062

Re: Does not handle G82

The problem is the G0 move on the last line of the code extract that is done at #100+-0.254: G00 X33.02000 Y73.74000Z[#100+- 0.2540 ] ;segmented line. Max segment length set to 5 It should be: G00 X33.02000 Y73.74000Z[#100+ 1.000 ] ;segmented line. Max segment length set to 5 since the retract (R) i...
by tomeletctronics
Sun Aug 29, 2021 1:36 pm
Forum: Bug Report
Topic: Does not handle G82
Replies: 5
Views: 1062

Does not handle G82

I have just noted that the autoleveller does not handle the Linuxcnc G82 command (Drilling Cycle, Dwell) correctly. This command will retract the tool after the drilling operation to the Z level before the execution of the command. The following is an extract from the original G-code file: G00 Z1.00...