Autoleveller

I am using Mastercam to generate the code. And yes, I've been using a text editor to remove the period.
Fortunately, it's an easy problem for the editor.
tony cervone

Notice the period after the brackets at N1232....
#102=[#575+0.10259*#587-0.10259*#575]
#101=[#576+0.10259*#588-0.10259*#576]
#100=[#102+0.67476*#101-0.67476*#102]
N1230 X1.1042 Y2.0047 Z[#100 + -0.004]
#102=[#575+0.08828*#587-0.08828*#575]
#101=[#576+0.08828*#588-0.08828*#576]
#100=[#102+0.6741 ...

What would this error in one of the code lines represent ? Without autoleveller, the code works fine. With autoleveller, the program generates the error when I am running it on the cnc machine.
thanks
tony

I am trying out v7 before considering v8. Here's the problem:
I am using a single side 4x8 board and milling a 2x3 circuit.
The probing operation went well: autoleveller probed according to the guide. The probe touched the board and continued its routing until the end.
I started milling and ...

Much is said about drilling first; then cutting the tracks. I am not sure how I can do this once the holes have been drilled.
The only way to do it, I guess, is to do the autolevelling with the engraving tool and set the autolevvelled code aside. Then drill without worrying too much about depth or ...

code sample with error is in the attachment.
tony

When I load the autolever gcode into mach 3, I receive the following error:
"radius to end of arc differs from radius to StartLine939"
which then prevents me from running and testing the code.
Any ideas?
thanks
tony