I want to use the autolevellerAE software with my cnc machine but the result of the probing is quite strange.
I searched on the internet and I understand that many people have the same issue with USB CNC machines.
When I analyzed the code generated by my cnc I noticed some duplicated lines:
Code: Select all
5.58282,104.56733,0.10396
16.24227,5.23248,-0.00313
26.90172,5.23248,0.00313
37.56055,5.23248,0.03945
48.22124,5.23248,0.10458
58.88069,5.23248,0.16470
58.88069,5.23248,0.16470
58.88069,5.23248,0.16470
58.88069,5.23248,0.16470
58.88069,5.23248,0.16470
58.88069,5.23248,0.16470
122.83864,5.23248,0.22106
122.83864,5.23248,0.22106
122.83864,5.23248,0.22106
122.83864,5.23248,0.22106
122.83864,5.23248,0.22106
122.83864,5.23248,0.22106
122.83864,5.23248,0.22106
122.83864,5.23248,0.22106
122.83864,5.23248,0.22106
122.83864,5.23248,0.22106
90.85967,16.26941,0.24611
90.85967,16.26941,0.24611
69.54015,16.26941,0.20228
69.54015,16.26941,0.20228
48.22124,16.26941,0.11398
48.22124,16.26941,0.11398
48.22124,16.26941,0.11398
48.22124,16.26941,0.11398
48.22124,16.26941,0.11398
48.22124,16.26941,0.11398
16.24227,27.30696,0.02004
16.24227,27.30696,0.02004
37.56179,27.30696,0.07953
48.22000,27.30696,0.11961
48.22000,27.30696,0.11961
48.22000,27.30696,0.11961
48.22000,27.30696,0.11961
90.85843,27.30696,0.23108
101.51912,27.30696,0.23046
101.51912,27.30696,0.23046
122.83740,27.30696,0.19539
133.49809,27.30696,0.16408
133.49809,27.30696,0.16408
133.49809,27.30696,0.16408
133.49809,27.30696,0.16408
144.15754,38.34389,0.13777
144.15754,38.34389,0.13777
122.83864,38.34389,0.17973
122.83864,38.34389,0.17973
122.83864,38.34389,0.17973
122.83864,38.34389,0.17973
122.83864,38.34389,0.17973
69.54015,38.34389,0.19539
69.54015,38.34389,0.19539
69.54015,38.34389,0.19539
69.54015,38.34389,0.19539
69.54015,38.34389,0.19539
69.54015,38.34389,0.19539
5.58282,38.34389,0.02254
5.58282,49.38020,0.03757
16.24227,49.38144,0.05198
16.24227,49.38144,0.05198
16.24227,49.38144,0.05198
48.22000,49.38144,0.13777
58.88069,49.38144,0.16846
58.88069,49.38144,0.16846
58.88069,49.38144,0.16846
90.85843,49.38144,0.21292
90.85843,49.38144,0.21292
90.85843,49.38144,0.21292
122.83740,49.38144,0.17096
122.83740,49.38144,0.17096
144.15754,49.38144,0.12212
144.15754,49.38144,0.12212
144.15754,49.38144,0.12212
144.15754,49.38144,0.12212
133.49809,60.41837,0.13151
122.83864,60.41837,0.16220
122.83864,60.41837,0.16220
122.83864,60.41837,0.16220
122.83864,60.41837,0.16220
122.83864,60.41837,0.16220
69.54015,60.41837,0.19351
69.54015,60.41837,0.19351
69.54015,60.41837,0.19351
37.56179,60.41837,0.11961
37.56179,60.41837,0.11961
37.56179,60.41837,0.11961
37.56179,60.41837,0.11961
37.56179,60.41837,0.11961
16.24227,71.45592,0.08580
16.24227,71.45592,0.08580
37.56179,71.45592,0.12149
48.22000,71.45592,0.14529
48.22000,71.45592,0.14529
69.54015,71.45592,0.17911
69.54015,71.45592,0.17911
69.54015,71.45592,0.17911
69.54015,71.45592,0.17911
112.17919,71.45592,0.17096
112.17919,71.45592,0.17096
133.49809,71.45592,0.11272
133.49809,71.45592,0.11272
154.81762,71.45592,0.06200
154.81762,71.45592,0.06200
144.15754,82.49285,0.07139
133.49809,82.49285,0.08767
133.49809,82.49285,0.08767
133.49809,82.49285,0.08767
133.49809,82.49285,0.08767
133.49809,82.49285,0.08767
133.49809,82.49285,0.08767
133.49809,82.49285,0.08767
58.88194,82.49285,0.16971
58.88194,82.49285,0.16971
37.56179,82.49285,0.12838
37.56179,82.49285,0.12838
37.56179,82.49285,0.12838
5.58282,82.49285,0.07703
5.58282,82.49285,0.07703
16.24227,93.53040,0.09331
16.24227,93.53040,0.09331
37.56179,93.53040,0.13151
37.56179,93.53040,0.13151
37.56179,93.53040,0.13151
69.54015,93.53040,0.18098
69.54015,93.53040,0.18098
90.85843,93.53040,0.18662
90.85843,93.53040,0.18662
90.85843,93.53040,0.18662
90.85843,93.53040,0.18662
133.49809,93.53040,0.08141
144.15754,93.53040,0.05448
144.15754,93.53040,0.05448
154.81762,104.56733,-0.02881
154.81762,104.56733,-0.02881
154.81762,104.56733,-0.02881
154.81762,104.56733,-0.02881
154.81762,104.56733,-0.02881
154.81762,104.56733,-0.02881
154.81762,104.56733,-0.02881
154.81762,104.56733,-0.02881
154.81762,104.56733,-0.02881
154.81762,104.56733,-0.02881
154.81762,104.56733,-0.02881
37.56179,104.56733,0.11773
26.90172,104.56733,0.09456
26.90172,104.56733,0.09456
5.58282,104.56733,0.08642
I've seen this post but is it not the same issue but similar : https://www.cncsoftwaretools.com/forum/ ... .php?t=349
Thank you in advance,
Tarik